Feb 3, 2014 | Garden fence, News
Fencing project. New fence in Bracknell
See below some photos of what the area looks like now.
I dismantled today what’s been left of that former fence and prepared the area..
That fencing job should be finished tomorrow. If everything goes to schedule I’ll post some photos soon after.
The fencing materials for this project include:
– Concrete posts
– 30cm concrete gravel boards
– 1.5m closed board fence panels
Giving the total fence height of 1.8m
All above supplied by a local friendly fence suppliers based in Winnersh.
Soil level on the other side of fence is much higher therefore I opted for 30cm high concrete gravel boards – to create a strong barrier and keep fence panels off the ground and extend their life.
Obviously any wood that is in direct contact with moist soil will rot much quicker..
Finale…
Job finished on time.
Below final pictures of this fencing project.
On one of them you can see the fence from the neighbour side. Soil level is much higher there.
Jan 30, 2014 | Garden fence, Landscaping
If you need a fence trellis to obscure view from/to your neighbours..
Good neighbours are always welcome but sometimes you need that little bit more of privacy. I supplied and installed a fence trellis on top of a brick wall to provide that extra privacy.
Here’s a couple of photos. Before and after.
Materials for this project:
– lattice diamond fence trellis
– 4×2 pieces of timber in required lengths – nicely finished with smooth edges, that will look much better.
For even better finish you might want to cut one side of supporting posts at an angle. ( see the picture )
Obviously drill etc but if you have a similar situation to the one in this garden you might also need a grinder to cut a piece of a slate at the top of wall so that the supporting wood sits flush with the wall.
The rest is pretty obvious.
Do it yourself or give me a call.
Jan 25, 2014 | Garden fence, News
Fencing
Fence made of:
– 4″ fence posts
– metposts bolted down into a concrete.
– wooden gravel board
– featherboards for a close board panel
– lots of nails 🙂
Contact me here
Jan 19, 2014 | Clearing, News
I had to cut down a line of conifers and remove their roots.

Also to be removed two bushes

Below photos of what it looked like after



Tree roots removed as well.

